-
5800mm - Aluminium Oval Handrail with Channel Insert5800mm long 75x30mm rectangular profile• Made from Alloy 6063 T62 part railing: (1) undercapping rail is screwed to top of post & (2) rectangular handrail is then snapped onto undercapping railEasy to install Free collection from Gold Coast, Brisbane, Adelaide, Melbourne Cardiff or Perth...
- From $115.50
-
- From $115.50
- Unit price
- per
-
Rectangular End Cap - Suits 75x30mm Rectangular HandrailEnd cap made from aluminium die castSuits 75x30mm rectangular handrail• Features protruding fins at bottom so end cap may be mechanically fixed to undercapping rail
- $2.63
-
- $2.63
- Unit price
- per
-
BARR Balustrade panel Aluminium Blade Fence Panel - 1000mm H x 1733mm W - White / Black, Batten FenceAllow total bracket gap of 10 to 14mm so a 1733mm wide panel fits a daylight opening of 1743 to 1747mm • 1000mm high panel; aluminium alloy 6063-T6 • 50x25mm pickets/balusters with 25mm front/facing edge • Cap pre-inserted in the top of each picket...
- From $243.60
-
- From $243.60
- Unit price
- per
-
12g x 50mm Long - Countersunk Screws - Pack of 50SS304countersunk head 12gx50mm screwUse for screwing mounting plates to bottom railLubricate screws before screwing with a Phillips #3 bit• Sold as a pack of 50
- $8.93
-
- $8.93
- Unit price
- per
-
Mounting Plate for Bottom Rail - Pack of 2 - 45x73x2mm• 4mm thick aluminium plates affix to either end of bottom rail so that bottom rail can fix to posts4 x countersunk holes enable screw fixing to bottom rail. Use 12gx50mm countersunk screws.2 x 7mm diameter holes for fixing plate to postPlates can be...
- From $6.30
-
- From $6.30
- Unit price
- per
-
65mm x 16.5mm Baluster With Centre Web - 6100MM LONGTECH SPECS 6100mm long slat/baluster Simply cut to required lengthsMade from Alloy 6060 T61.2mm wall thickness baluster: 65x16.5mm profileFeatures centre web in extrusion profile for added strength• lxx =9.60 x 10E3 mmE4 • lyy =83.09 x 10E3 mmE4 Please ensure the plastic wrap is...
- From $44.00
-
- From $44.00
- Unit price
- per
-
Aluminium Balustrade - 5600mm long - Square Picket Baluster, 4 pack.• 5600mm long picket/baluster Simply cut to required lengthsMade from Alloy 6106 T6: premium & rigid alloy1.4mm wall thickness baluster: 16.5x16.5mm profileSold in bundles of 4• lxx =311 x 10E3 mmE4; lyy =3.13 x 10E3 mmE4 Bundled in packs of 4.
- From $88.00
-
- From $88.00
- Unit price
- per
-
Timber fixing kit 4 PACK - SS316• M10 x 110mm timber lag screws x4 with nuts and washers • Nuts fit under high domical covers. Fixing kit cannot be used with slimline covers (slimline covers use countersunk fixings)a
- $15.75
-
- $15.75
- Unit price
- per
-
3022mm Long Bottom Rail Insert - Suits 65x16.5mm Balusters3022mm long punched insert; Cut to required widths• 6063 T5Snaps into bottom rail - 5800mm Long Bottom Rail - to create the complete bottom rail systemPunched at 64mm gap spacing providing 130mm centre to centre of balustersSuits 65x16.5mm slat balustersBalusters simply press down into...
- From $29.40
-
- From $29.40
- Unit price
- per
-
VISOR Balustrade - Aluminium Rectangular Handrail - 6100mm LongPLEASE DOWNLOAD THIS HELPFUL FORM TO WORKOUT YOUR VISOR NEEDS.Please open this form via Microsoft Excel 6100mm long snap-on slimline handrail: 70mm wide x 23mm high profile Mates with undercapping plate 2.8mm top wall thickness provide a sturdy/rigid toprail surface Made from alloy 6063...
- From $81.40
-
- From $81.40
- Unit price
- per
-
Mounting Plate for Bottom Rail *Raked* - Pack of 2 - 45mm x 85mm x 9mm9mm thick aluminium plates affix to either end of bottom rail so that bottom rail can fix to postsUsed for RAKED installations - plates suit 34 to 37 Degrees angles4 x countersunk holes enable screw fixing to bottom rail. Use 12g x 50mm countersunk...
- From $13.65
-
- From $13.65
- Unit price
- per
-
1400mm Long Aluminium Infill / Spacer for Perforated BalustradeUsed in 2 applications: For RAKED stair installations, cut to required size as a spacer between balusters for snap into undercapping railFor 3 rail installations, snap into undercapping rail to fill void as balusters do not penetrate into uncapping rail. TIP: infill is 1400mm...
- From $6.30
-
- From $6.30
- Unit price
- per
-
VISOR Balustrade - 14g Panhead Screw - 14g x 50mm Long - Pack of 50Square drive panhead - SS304 Use for: Screwing Visor Balusters sideways through base rail and; Screwing top friction plate to baluster Lubricate screws before screwing Sold as a 50 pack
- $9.45
-
- $9.45
- Unit price
- per
-
Premium Perf Balustrade - 38x25mm - FRAME KITSatin black or Monument matt powder coat• Kit frames perfbalustrade infill panel2 part frame design enables idden screw fixing of perf infill sheet to frame. Fixing screws are covered by snap in cover.Finished frame profile is 38x25mm around the entire perimeter of infill sheet.Framed...
- $133.35
-
- $133.35
- Unit price
- per
-
Square Head Driver Bit - Suits 3.4mm Square Screw Head Hole• Driver bit to suit 3.4mm square screw head hole• Suits panhead screws used with "C" brackets
- $2.50
-
- $2.50
- Unit price
- per
-
VISOR Balustrade - 12g Panhead Screw - 12g x 50mm Long - Pack of 50Square drive panhead - SS304 Use for screwing Visor Baluster from underside of base rail - lubricate screws before screwing 2 x screws required per baluster Sold as a 50 pack
- $9.45
-
- $9.45
- Unit price
- per
-
VISOR Balustrade - 'T' Deck Mount End Plates - Pack of 2PLEASE DOWNLOAD THIS HELPFUL FORM TO WORKOUT YOUR VISOR NEEDS.Please open this form via Microsoft Excel "T" shape end plates to suit deck mount base 3mm extruded aluminium with 3 x fixing holes Drill 3 x 3.5mm diam hole into end of deck mount...
- From $5.78
-
- From $5.78
- Unit price
- per
-
VISOR Balustrade - Aluminium Friction Insert - Pack of 2 - 3050mm Long (Total 6100mm per 2 Pack)PLEASE DOWNLOAD THIS HELPFUL FORM TO WORKOUT YOUR VISOR NEEDS.Please open this form via Microsoft Excel Clear Anodise finish 3050mm long aluminium insert: 2 pcs per pack Mates with slotted undercapping plate 50x10mm balusters insert into assembled unit and balusters finish at the underside...
- $26.25
-
- $26.25
- Unit price
- per
-
VISOR Balustrade - Aluminium Undercapping Plate - 4000mm LongPLEASE DOWNLOAD THIS HELPFUL FORM TO WORKOUT YOUR VISOR NEEDS.Please open this form via Microsoft Excel 4000mm long top undercapping plate 40 x pre-slotted holes at 100mm centres into which 50x10mm balusters insert 2.2mm plate thickness provide for a sturdy top undercapping plate Features...
- From $60.90
-
- From $60.90
- Unit price
- per
-
3250mm Long Bottom Rail Insert - Suits 16.5x16.5mm BalustersSuits 16.5x16.5mm square balusters3250mm long punched insert• 6063 T5Snaps into bottom rail - 5800mm Long Bottom Rail - to create the complete bottom rail systemPunched at 92.5mm gap spacing providing 110mm centre to centre of balusterBalusters simply press down into punched holes and are...
- From $26.25
-
- From $26.25
- Unit price
- per