-
Wire rope grip 3.2mm Stainless Steel 316β’ Suits 3.2mm wire β’ Clamping action holds wire in place
- $1.99
- $1.99
- Unit price
- per
-
Dome head terminal 3.2mm Stainless Steel 316β’ Swage terminal onto 3.2mm wire β’ Commonly used at opposite end of a hex tensioner installation β’ Head of dome terminal rests on outside wall of post β’ Provides slimline finish
- $3.99
- $3.99
- Unit price
- per
-
3.2mm thimble Stainless Steel 316β’ Use with 7x7 wire and ferrule for hand swaging β’ Simple installation - swage onsite with hand tool β’ Thimble commonly used with eye screws or saddles for end fixings
- $0.53
- $0.53
- Unit price
- per
-
Blind rivet nut M6 Stainless Steel 304β’ M6 - Left & right threaded available β’ Also referred to as a nutsert β’ Install with rivet nut hand tool β’ Suitable for metal posts - drill hole size: Diameter 9mm β’ Commonly used with eye screws or threaded terminals
- $1.33
- $1.33
- Unit price
- per
-
Eye to eye turnbuckle M5 Stainless Steel 316β’ Turnbuckle open body β’ M5 - Eye to eye (with locking nuts) β’ Tighten wire by turning body of fitting β’ Use with thimble and ferrules or wire rope grip β’ Commonly used with 7x7 wire due to wire flexibility required
- $3.99
- $3.99
- Unit price
- per
-
-
-
M6 right hand threaded mandrelβ’ Use with RIV-TOOL for right hand threaded nutsert (BW-M6RIVNUT-R) β’ Mandrel included with rivet nut hand tool is right threaded - purchase separately if extra right hand threaded M6 mandrel is required
- $26.98
- $26.98
- Unit price
- per
-
Square post screw setParis Offset Bracket - SQUARE POST SCREW SET - M8 x 50mm machined SS304 Screw with conical head, washer & SS304 threaded 36mm SQUARE BLOCK(suits Square Tube from 40mm upwards)
- $7.87
- $7.87
- Unit price
- per
-
Flat rail converterβ’ Use to fix flat metal railing to 50x10mm intermediate post β’ Provides a neat finish with hidden fixing β’ Insert M6 nutsert into rail, screw flat rail converter into nutsert then drop into post
- $17.57
- $17.57
- Unit price
- per
-
Adjustable top plateβ’ Grub screw clamps to top of 50x10 intermediate post β’ Mechanical fix to post if required β’ No welding required - easy post height adjustment with extended neck fitting β’ 2x CSK holes - 2x grub screws
- $30.60
- $30.60
- Unit price
- per
-
PRE-DRILLED 50x10mm intermediate postβ’ 972mm high with 11 x pre-drilled Diameter 5mm holes at 81mm centres β’ SS316 high polish β’ Provides slimline finish with 10mm front on profile β’ Hole centres match with Breezewire 50.8mm diameter end posts β’ Welded base plate with 2x countersunk holes...
- $109.08
- $109.08
- Unit price
- per
-
Round rail converterβ’ Suits 50x10 intermediate post - Fix to Diameter 50.8mm tube β’ Tube can be neatly screwed/riveted from tags at side of fitting β’ Mechanical fix to post if required
- $17.57
- $17.57
- Unit price
- per
-
Vertical gate stile with extended bottom rail 1640MM OR 1940MM Hβ’ To install, remove pre-installed vertical stile on gate end and re-install with extended leg option β’ Suggested to use if finished sliding gate width needs extra width for gate motor installation. Instead of adding another middle gate panel, gate width may be extended...
- from $131.69
- from $131.69
- Unit price
- per
-
Hook to eye turnbuckle M5 Stainless Steel 316 with locking nutβ’ Turnbuckle open body β’ M5 - Hook to eye (with locking nut) β’ Tighten wire by turning body of fitting β’ Use with thimble and ferrules or wire rope grip β’ Commonly used with 7x7 wire due to wire flexibility required β’ Hook...
- $3.33
- $3.33
- Unit price
- per
-
Security top plateβ’ 324mm wide flat plate with fixing holes both ends β’ 5mm steel hot dip galvanised powder coated black β’ Optional extra security feature to install on the gate leading edge tunnel post for when gate in closed position β’ Install plate just above...
- $23.95
- $23.95
- Unit price
- per
-
Zeus DETE steel panel 2100MM H x 2400MM Wβ’ Complies with Specifications for Security Fencing in State Schools (Department of Education QLD)** β’ Pickets: 25x25x1.6mm punched through rails with silicon bronze welds to rails β’ Rails: 40x40x2mm with picket centres of 125mm β’ Grade of steel: C250 chemical composition β’ Coating: whip...
- $332.55
- $332.55
- Unit price
- per
-
Madrid Timber/beam fixing kit for Madrid Verticalβ’ 2 x flat washers & 2 x spring washers β’ 2 x nuts β’ 1x 6.5mm thick packer ** M12 lag screw sold separately
- $13.30
- $13.30
- Unit price
- per
-
Rivet nut hand tool HAND OPERATEDβ’ Allows quick insertion of stainless rivet nuts into posts β’ Push/pull rod for quick thread insert and release β’ Includes M4, M5, M6, M8 & M10 mandrel set β’ Adjustable stroke for different wall thickness on posts (0.5mm to 3mm) β’ Spare M8...
- $345.85
- $345.85
- Unit price
- per
-
40x40mm flat cap (cap only) SS316β’ 40x40mm square cap β’ Suits 40x30mm square standoff β’ 5mm thick with CSK hole
- $7.87
- $7.87
- Unit price
- per
Reliable Fencing and Balustrades for Your Home
Are you planning to have your own swimming pool, or are you in need of new fencing and balustrades for your home or yard?
Selecting the right fencing for your needs can be a challenge, with various options available such as architectural balustrades, PVC, powder-coated aluminium, or high-quality, frameless glass panels.
You want to ensure that the fencing you choose is not only durable and reliable but also stylish and visually appealing.
Affordable Fencing and Balustrades and Fast Delivery
At Glass House AU, we offer premium-grade fencing and glass balustrades to customers all over Australia at an affordable price point. Our online shop makes it easy for you to find and purchase the right fencing products for your needs.
We're committed to providing only the best quality products at reasonable prices, ensuring customer satisfaction. Check out our fencing and balustrade products today, or reach out to us at info@glasshouseau.com for more information. We offer fast delivery and exceptional customer service to meet your requirements.







