HORIZONTAL SLAT SYSTEM COMPONENTS

TECH SPECS • PP 104 / AP 156 • Alloy 6063-T6 / 5800mm long Used as Horizontal top and bottom rail or as a side frame.   If using as a side frame: • Each slat must be screw fixed to side frame •...

MATES WITH QS-5800-SF TECH SPECS • PP 100 / AP 116 • Alloy 6060-T5 / 5800mm long • Snap-on cover for side frame • Hides screws used to affix slats to side frame • lxx = 0.71 x 10E3 mmE4 • lyy = 6.58...

• Colour match touch up paint

 40° FINAL SLAT ANGLE • 1x left and 1x right bracket per pack • Die cast aluminium • Suits 65x16.5mm slat – Press brackets onto end of slat then insert bracket into side frame • Space brackets at nill, 5, 9, 20mm or any...

MATES WITH QS-5800-CSR • Black nylon cap • Simply press into screw flutes in centre support rail • Easy and fast fitting of cap

• Fixing plates welded both sides - 100mm L x 26mm W x 10mm D• 2x Ø9mm fixing holes (plate 1) & 2x 7mm fixing holes (plate 2)

TECH SPECS • PP 184 / AP 184 • Alloy 6060-T5 • Quickscreen frame fits neatly inside heavy duty U channel • 5000mm long • 2.5mm wall thickness • lxx = 23.97 x 10E3 mmE4 • lyy = 38.92 x 10E3 mmE4   Free...

• Colour match touch up paint • Simply spray on for minor touch ups

MATES WITH QS-5800-SF + QS-5800-CFC • Black nylon cap • Simply press into side frame • Easy and fast fitting of cap

TECH SPECS • PP 109 / AP 163• Alloy 6060 – T5• Simple 2 step process: (1) Adapter fixes to post/wall. (2) Quickscreen side frame then attaches to adapter into which slats insert• Ideal for when screens to run at 135 degree angle from...

MATES WITH XP-5800-CSR • Optional extra to install as part of centre support rail • Aluminium with countersunk hole machining • 2x CSK screws included for fixing to CSR • Use to brace top and/or bottom of centre support rail to structure above or...

  MATES WITH AWQS-5800-SF QS-5800-SF-MN TECH SPECS • PP 100 / AP 116 • Alloy 6060-T5 / 5800mm long • Snap-on cover for Alumawood side frame • Hides screws used to affix slats to side frame • Cover not required in vertical slat installs...

TECH SPECS • PP 104 / AP 156 • Alloy 6063-T6 / 5800mm long • Each slat must be screw fixed to side frame • For horizontal slat – affix side frame directly to post or wall or use with F-section • For vertical...

• 50 screws: 10G x18mm long • 10x spacer blocks • Spacers enable 9mm, 15mm or 20mm spacing between slats • Use screws to fix off slats • Once screws fixed off, spacers may be removed

TECH SPECS • PP 109 / AP 163 • Alloy 6060 – T5 • Simple 2 step process: (1) Adapter simply fixes to post/wall. (2) Quickscreen side frame then attached to adapter into which slats insert • Ideal for when screens to run at...

• Aluminium with countersunk hole machining • Terrain finish suits WRC & Kwila. Monument suits Island Grey • Use to brace off top and/or bottom of centre support rail to top and bottom rails • Bracing centre support rail provides extra rigidity

OPTIONAL EXTRA Commonly used for screens 2000mm or wider to provide strength & rigidity to panel Snap-on cover hides fixings – provides slimline sturdy support rail with no visible fixings TECH SPECS • PP 126 / AP 188 • Alloy 6063-T5 • 5800mm long...

TECH SPECS • PP 184 / AP 184 • Alloy 6060-T5 • 5000mm long • For horizontal slat – not required • For vertical slat – use as top/bottom U channel frame into which frames inserted (refer code AWQS-5800-SF) • 2.5mm wall thickness •...

TECH SPECS • PP 170 / AP 234 • Alloy 6063-T6 • 5800mm long • Fix off to wall or post through 15mm offset leg • For horizontal slat – use in a void situation or if panels pre-assembled in factory for installation onsite...

TECH SPECS • PP 170 / AP 234 • Alloy 6063-T6 • 5800mm long • Fix off to wall or post through 15mm offset leg • Use in a void situation or if panels pre-assembled in factory for installation onsite • 1.4mm wall thickness...