Gate Frame and Panel Frame, Galvanised Steel. Adjustable.

An adjustable gate or fence panel frame made from 2mm galvanised steel, 25mm x 25mm box section, with corner-stake construction and steel tube connector rails. Delivery covers Sunshine Coast (to Noosa), Brisbane metro, Gold Coast, Northern Rivers (north of Ballina), Tweed, Melbourne metro, Adelaide metro, Cardiff metro and Perth metro, with collection also available in these areas. Choose from three gate sizes (1800mm x 1800mm, 1200mm x 1800mm or 1800mm x 1100mm, each adjustable down from its maximum) or a 1800mm x 2500mm fence panel frame. Gates come with two pre-welded hinges; the panel frame has no hinges and cannot be used as a gate. To fit, cut the rails to your desired size, screw your own timber palings, slats or battens onto the frame, then screw the corners back on. It ships flat-packed in a box roughly 1900mm x 400mm x 200mm, weighing about 17kg per gate.

Made from 2mm Galvanised steel, 25 x 25mm box section

Corner stake construction with steel tube connector rails

Height and Width adjustable

Gate Frames

1800mm x 1800mm gate is adjustable up to 1800mm x 1800mm

1200mm x 1800mm gate is adjustable up to 1200mm x 1800mm

1800mm x 1100mm gate is adjustable up to 1800mm x 1100mm

Fence Panel Frame

1800mm x 2500mm panel frame is adjustable up to 1800mm x 2500mm

Simply, cut rails to desired size, fit together and screw you desired cladding on.

All gates come with 2 x pre welded hinges, where as the fence panel frame does not have hinges and cannot be used as a gate.

Gate frames are designed so you can add timber palings, slats or battens, simply unscrew the corners, cut down the rails to your desired size and screw the corners back on.

Will come flat packed in a box

The weight is approx. 17kg per gate

Box size is approx. - 1900mm x 400mm x200mm

Delivery is to the below areas only,

Sunshine Coast, (as far north as Noosa)

Brisbane metro

Gold Coast

Northern Rivers, (north of Ballina)

Tweed

Melbourne metro

Adelaide metro

Cardiff metro,

Perth metro

If outside of these areas please ask.

Collection is also possible in the above areas.

Common questions about the Gate Frame

What is this gate frame kit, and what does it come as?

An adjustable steel frame, either a gate (in one of three sizes, each with two pre-welded hinges) or a fence panel frame with no hinges. It's a bare frame: you add your own cladding.

Who is this gate frame designed for?

DIY fence and gate builders who want to supply their own timber palings, slats or battens rather than buy a finished, clad gate, since the page's instructions assume you're cutting rails and screwing on cladding yourself. 

Moderate DIY skill level required, you’ll need your own tools and screws

What cladding and fixings does this gate frame work with?

It's designed to take timber palings, slats or battens: unscrew the corners, cut the rails down to your size, screw your cladding on, then screw the corners back on.

What's the difference between the gate frame and the fence panel frame, and what's included with each?

The three gate sizes each include two pre-welded hinges. The 1800mm x 2500mm fence panel frame does not include hinges and, the page states directly, cannot be used as a gate.

When would this gate frame be the wrong choice?

Order the wrong variant and you're stuck: the fence panel frame cannot be used as a gate, so if you need a gate, order one of the three gate-specific sizes instead. Sizes are limited to the four listed options, each adjustable down from its maximum, not up.