ALUMINIUM PICKET BALUSTRADE

TECH SPECS • 5800mm long post: suits core drill installation   Cut to required lengths • Made from Alloy 6106 T6: premium & rigid alloy• 3.2mm wall thickness post: 50x50mm profile• Screw flutes in extrusion allow non-weld affixing of top rail• lxx = 214.10 x 10E3 mmE4• lyy = 214.28 x 10E3...

• 5800mm long heavy duty bottom rail• Cut to required widths to fit between posts• 6060 T6• 3mm wall thickness for maximum strength• Snap in insert into open cavity to suit either 16.5x16.5 or 65x16.5mm balusters• Patented NON WELD friction fit system• No rattle with tension legs gripping vertical balusters• Fix of...

• 5800mm long 75x30mm rectangular profile• Made from Alloy 6063 T6• 2 part railing: (1) undercapping rail is screwed to top of post & (2) rectangular handrail is then snapped onto undercapping rail• Easy to install   Free collection from Gold Coast, Brisbane, Adelaide, Melbourne Cardiff or...

Black / Monument / Woodland grey / Silver / Surfmist / White / Basalt / Dune / Mill finish • Bags of 100 - 10G x 16mm self drilling wafer head zinc plated • Powder coated heads for neat finish • Self drilling screws...

• 3214mm long punched insert• Cut to required widths• 6063 T5• Snaps into bottom rail - 5800mm Long Bottom Rail - to create the complete bottom rail system• Punched at 114mm gap spacing providing 137 centre to centre of baluster• Suits 16.5x16.5mm square balusters for RAKED INSTALLATIONS - suits from...

• Suits 16.5x16.5mm square balusters• 3250mm long punched insert• 6063 T5• Snaps into bottom rail - 5800mm Long Bottom Rail - to create the complete bottom rail system• Punched at 92.5mm gap spacing providing 110mm centre to centre of baluster• Balusters simply press down into punched holes and are...

Used in 2 applications: • For RAKED stair installations, cut to required size as a spacer between balusters for snap into undercapping rail• For 3 rail installations, snap into undercapping rail to fill void as balusters do not penetrate into uncapping rail. TIP: infill is 1400mm...

• Colour match touch up paint

• 106x106mm outer - 52x52mm inner - Alloy ADC12 • Suits screw fixed base plated posts - does not suit welded 134x100mm base plated posts or 115x100mm base plate sets • Cover can be fitted to posts after fence is installed

• Suits all 50x50mm core drill posts • 100mm x 100mm outer - 52mm x 52mm inner

• SS304 panhead screw 12g25mm with square drive head• Use for: (1) screwing bottom rail mounting plate to aluminium posts (2) fixing sideway through the bottom rail into the baluster at 2 places per span to act as a 'locking' screw to mechanically fix bottom rail to balusters (3)...

• End cap made from aluminium die cast• Suits 75x30mm oval handrail• Features protruding fins at bottom so end cap may be mechanically fixed to undercapping rail

• 5800mm long 75x30mm rectangular profile• Made from Alloy 6063 T6• 2 part railing: (1) undercapping rail is screwed to top of post & (2) rectangular handrail is then snapped onto undercapping rail• Easy to install Free collection from Gold Coast, Brisbane, Adelaide, Melbourne Cardiff or Perth...

TECH SPECS• Sturdy base plated post at 1050mm high overall• Simply cut top of post to reduce height if needed• Made from Alloy 6106 T6: premium & rigid alloy• 3.2mm wall thickness post: 50x50mm profile• 100x100mm base plate 10mm thick welded on;   4x11mm diameter fixing holes• Screw flutes in extrusion...

• SS304 countersunk head 12gx50mm screw• Use for screwing mounting plates to bottom rail• Lubricate screws before screwing with a Phillips #3 bit• Sold as a pack of 50  

• Offset bracket made from aluminium die cast• Suits 75x30mm oval handrail• Caps over top of handrail and features offset leg for fixing to wall/post• Mechanically fix bracket to handrail by screwing through side of bracket into handrail• 2 x 7mm diameter fixing holes to post/wall• Sold as a 2...

• Offset bracket made from aluminium die cast• Suits 75x30mm rectangular handrail• Caps over top of handrail and features offset leg for fixing to wall/post• Mechanically fix bracket to handrail by screwing through side of bracket into handrail• 2 x 7mm diameter holes for fixing to post/wall• Sold as a...

• 5600mm long picket/baluster   Simply cut to required lengths• Made from Alloy 6106 T6: premium & rigid alloy• 1.4mm wall thickness baluster: 16.5x16.5mm profile• Sold in bundles of 4• lxx = 311 x 10E3 mmE4; lyy = 3.13 x 10E3 mmE4

• End cap made from aluminium die cast• Suits 75x30mm rectangular handrail• Features protruding fins at bottom so end cap may be mechanically fixed to undercapping rail