Wire Fencing & Fittings

• Swageless - No specialised tools required • Suits 3.2mm wire • Simply push in wire and rotate gripping terminal body to tighten - quick and easy assembly • Use with eye screws, lag screws or saddles

• Jaw and swageless - No specialised tools required • M6 x 3.2mm (with locking nut) • Simply push in wire and rotate gripping terminal body to tighten - quick and easy assembly • Use with eye screws, lag screws or saddles

• Use to screw M6 lag eye screws into timber • Use with standard cordless drill

BreezeWire - Lag Eye Screw 6 x 60mm - SS316 7mm diameter eye hole

• Available in UV stabilised black or grey • Should always be used when wire passes through steel or aluminium posts • Drill hole size: 9mm • Use to prevent electrolysis or chafing by separating stainless steel wire from touching metal or aluminium

• Use with RIV-TOOL for left hand threaded nutsert (BW-M6RIVNUT-L) • Mandrel included with rivet nut hand tool is right threaded only - if installing left threaded nutserts, a left threaded mandrel is required

• Use in conjunction with 7x7 wire and thimble • Use hand swage tool to clamp swage sleeves

• Cut 7x7 or 1x19 wire with this hand tool

• M5 saddle • Versatile end fitting - affix to timber or steel/aluminium • Ideal for staircase/angled installs in conjunction with rigging screws/fork terminals - terminals can swivel to required angle easily

• Fork terminal swage • M5 x 3.2mm • Use with eye screws, lag screws or saddles • Swage to wire using hydraulic press • In-house hydraulic swaging service available

• Jaw swage - rotate body to tighten wire • M5 x 3.2mm (with locking nut) • Use with eye screws, lag screws or saddles • Swage to wire using hydraulic press • In-house hydraulic swaging service available

• Commonly used for hand swaging 7x7 wire with thimble and ferrule fittings

OFFSET HANDRAIL WITH NO WELDING REQUIRED!

• 1x turnbuckle hook & eye, 2x lag eye screws, 2x grips & wire and 2x saddles • Available in 2.5mt, 5mt, and 10mt kits • Use to grow vines or vertical gardens - a great solution for creating green spaces

• M6 lag eye screw • Suitable for fixing to timber • Ideal for staircase/angled installs in conjunction with rigging screws/fork terminals - terminals can swivel to required angle easily

• M6 internal right hand thread • Use with M6 threaded terminal (BW-TTM6-3.2-R) • Tighten wire by turning allen key head - wire must be swaged

• Swage stud - Left & right hand available - provides slimline finish • M6 x 3.2mm (with locking nut) • Threads into M6 blind rivet nut or M6 tapped post • Tighten by turning terminal with spanner • Swage to wire using hydraulic...

• Suits 3.2mm wire • Clamping action holds wire in place

• Swage terminal onto 3.2mm wire • Commonly used at opposite end of a hex tensioner installation • Head of dome terminal rests on outside wall of post • Provides slimline finish

• M6 - Left & right threaded available • Also referred to as a nutsert • Install with rivet nut hand tool • Suitable for metal posts - drill hole size: Diameter 9mm • Commonly used with eye screws or threaded terminals