-
Steel sliding gate track 3000MM LONG OR 6000MM LONG• Available 3000mm or 6000mm long • Made from 3mm galvanised steel for durability • Bolt down sliding gate track with a Ø20mm running surface • Easy to install with predrilled fixing holes (22 holes for 3000mm track and 42 holes for 6000mm track)...
- From $42.90
-
- From $42.90
- Unit price
- per
-
Sliding gate wheel• 90mm diameter with 20mm diameter groove • Recessed fitting into gate bottom frame. Gate frame pre-slotted for wheel replacement • Zinc plated steel • Features double bearings: 300kg rating per wheel • Made in Italy • Sold as a single wheel
- $32.45
-
- $32.45
- Unit price
- per
-
Sliding gate track pins• Mushroom head galvanised steel track anchor pins • 6.5mm x 38mm • Pre-expanded expansion anchor. Once hammered in, unique kinked shaft provides a spring action for vibration proof anchoring. Use 6.5mm masonry bit into concrete
- $1.10
-
- $1.10
- Unit price
- per
-
Zeus steel middle sliding gate panel 1790MM or 2090MM H x 1260mm W or 2100mm W• Extend the sliding gate. Select module as required and extend gate width by a further 1260mm or 2100mm • Extend gate width by adding up to 2 extra middle gate panels • Middle panels have pre-drilled holes top & bottom rail for bolting...
- From $218.90
-
- From $218.90
- Unit price
- per
-
Zeus steel sliding gate kit 1790MM or 2090MM H x 4260mm WOnly order this is you have a forklift to unload as it weighs over $250kg Kit includes: • 1 x left side at 2130mm wide • 1 x right side at 2130mm wide • 2 x 595mm long heavy duty internal joiners -...
- From $1,320.00
-
- From $1,320.00
- Unit price
- per
-
Tunnel post joiner 330MM• Sleeves into 2 x 65mm x 65mm steel posts to create a 200mm inner wide tunnel • Posts sold separately • Suggested to use tunnel post at both ends of sliding gate and affix with anti tamper screws • Black powder coated galvanised...
- $38.50
-
- $38.50
- Unit price
- per
-
Joiner Kit 2 PACK for Zeus sliding gate• 2 x 595mm long heavy duty internal joiners • Use if extending gate width by adding middle gate panel. Each middle gate panel requires 1 x joiner kit • 5mm thick heavy duty hot dip galvanised steel powder coated black • Slotted top...
- $143.00
-
- $143.00
- Unit price
- per
-
Brackets for roller guide 2 PACK• Fixing plates for guide rollers - 90x70mm angle - 105mm wide • 5mm hot dip galvanised steel powder coated black • 2 pack: 1x left bracket and 1x right bracket • 30 x 22mm slotted hole for guide roller installation. Slotted hole allows...
- $35.20
-
- $35.20
- Unit price
- per
-
Guide roller• 60mm diameter roller x 60mm long with M20 thread • Premium roller featuring ball bearings with stainless steel bearing cage • Made in Italy • Assemble onto posts with specially made plates – refer code : ZF-SG-ANGLE-2PK • Sold as single guide roller....
- $82.50
-
- $82.50
- Unit price
- per
-
Gate catch• 5mm steel hot dip galvanised powder coated black • Suits tunnel posts configuration with 200mm wide tunnel • Total of 8x 7mm diameter fixing holes • Sliding gate should stop approx. 20mm short of gate catch end
- $46.20
-
- $46.20
- Unit price
- per
-
15mm Packer 4 PACK• Allows height increase of Zeus sliding gate height by 15mm • Position packer in between gate wheel and bottom rail • Suits sliding gate wheel • Hot dip galvanised steel powder coated black
- $19.80
-
- $19.80
- Unit price
- per
-
Screw for gate wheel 4 PACK• M8x30mm Taptite screw: 4 pack • Use to affix gate wheel to bottom rail. Each wheel requires 2x Taptite screws • Hex flange head • Special trilobular thread forming screw. Superior resistance to vibrational loosening • Pilot hole drill 7.3mm into gate bottom...
- $6.60
-
- $6.60
- Unit price
- per
-
Security top plate• 324mm wide flat plate with fixing holes both ends • 5mm steel hot dip galvanised powder coated black • Optional extra security feature to install on the gate leading edge tunnel post for when gate in closed position • Install plate just above...
- $19.80
-
- $19.80
- Unit price
- per
-
Vertical gate stile with extended bottom rail 1640MM OR 1940MM H• To install, remove pre-installed vertical stile on gate end and re-install with extended leg option • Suggested to use if finished sliding gate width needs extra width for gate motor installation. Instead of adding another middle gate panel, gate width may be extended...
- From $108.90
-
- From $108.90
- Unit price
- per